Wire mesh fence is made from welded low-carbon steel wire (Q195 or Q235 by order). It is used for gardens, residential compounds, factories, and public facilities. The standard mesh opening is 50 × 120 mm (other openings by order). Standard panel widths are 2.0 m and 2.5 m, with heights from 0.6 m to 2.0 m (taller sizes by order). Available finishes include electro-galvanizing, hot-dip galvanizing, and PVC coating. For coated panels, the steel core is approximately 3.2 mm and the finished diameter is approximately 4.0 mm (coating thickness confirmed by order). Posts and fittings are supplied according to panel height and installation requirements.
Specifications
Material: Low-carbon steel wire (Q195 or Q235 by order)
Production Method: Welded mesh panel
Mesh Opening: 50 × 120 mm (other openings by order)
Steel Core Diameter: Approximately 3.2 mm
Diameter After PVC Coating: Approximately 4.0 mm (coating thickness confirmed by order)
Panel Width: 2.0 m or 2.5 m
Panel Height: 0.6, 0.8, 1.0, 1.2, 1.5, 1.8, or 2.0 m (taller sizes by order)
Surface Options: Electro-galvanized, hot-dip galvanized, or PVC-coated
End Treatment: Bent ends or straight ends (confirmed by order)
Fence Posts: Supplied according to panel height and fixing method
Fixings: Clips, brackets, and bolts subject to the selected post system
Packing: Panels and posts packed separately. Packing details are confirmed before shipment.
Important: The final wire diameter depends on coating thickness. Core diameter and finished diameter should both appear on the purchase order.
Applications
- Garden and residential boundary fencing
- Factory, warehouse, and workshop perimeters
- Parks, schools, and public areas
- Roadside landscaping and general site separation
Post size, post spacing, and foundations must be selected according to fence height, soil conditions, and local wind load.
Stock Product Options
1.0 × 2.0 m Welded Mesh Fence Panel
A low fence panel for gardens, pathways, and internal boundaries. The 1.0 m height separates an area without heavily restricting visibility. Both galvanized and PVC-coated finishes can be quoted.
Specifications:
Panel Size: 1.0 m high × 2.0 m wide
Mesh Opening: 50 × 120 mm
Core Wire: Approximately 3.2 mm
Finish: Galvanized or PVC-coated
End Treatment: Bent ends or straight ends by order
Typical Use: Gardens, paths, and property divisions
1.2 × 2.5 m Green PVC-Coated Wire Mesh Fence
This size is commonly selected for residential compounds and landscaped areas. The PVC coating gives the panel a green finish. For this specification, the wire is approximately 3.2 mm before coating and 4.0 mm after coating.
Specifications:
Height: 1.2 m
Width: 2.5 m
Mesh Opening: 50 × 120 mm
Wire Diameter: 3.2 mm core, approximately 4.0 mm coated
Finish: Green PVC coating
End Treatment: Bent ends or straight ends by order
Use: Housing boundaries, gardens, and parks
Order Note: Confirm whether galvanizing is required beneath the PVC layer.
1.5 × 2.5 m Hot-Dip Galvanized Fence Panel
A medium-height welded panel for factories, storage yards, and commercial property. Hot-dip galvanizing is suitable for outdoor service. The required zinc coating should be stated in the order if the project has a specified corrosion class.
Specifications:
Panel Size: 1.5 × 2.5 m
Mesh Opening: 50 × 120 mm
Wire Diameter: Approximately 3.2 mm
Finish: Hot-dip galvanized
End Treatment: Bent ends
Use: Factory yards, warehouses, and commercial boundaries
1.8 × 2.5 m PVC-Coated Perimeter Fence
The 1.8 m panel is used where a taller visible boundary is needed. It can be installed around schools, residential compounds, and general commercial sites. Posts, clips, and foundations are selected separately for the project.
Specifications:
Panel Size: 1.8 m high × 2.5 m wide
Mesh Opening: 50 × 120 mm
Core/Coated Diameter: Approximately 3.2/4.0 mm
Finish: PVC-coated
End Treatment: Bent ends
Typical Use: Schools, compounds, and commercial perimeters
2.0 × 2.0 m Galvanized Wire Mesh Fence
This 2.0 m high panel is intended for workshops, utility areas, and taller perimeter sections. The 2.0 m width is easier to handle on fence lines with corners or limited installation space.
Specifications:
Height: 2.0 m
Width: 2.0 m
Mesh Opening: 50 × 120 mm
Wire Diameter: Approximately 3.2 mm
Finish: Galvanized
End Treatment: Bent ends
Use: Workshops, utility compounds, and site boundaries
