Wire Mesh Cable Tray is used for routing low voltage cables, telecommunication cables, data cables, and fiber optic cables on short spans. It is made from welded steel wire mesh with an open basket structure. The open design helps cable ventilation and makes cable checking easier during installation and maintenance. Standard length is 3000 mm. Common mesh pitch is 100 x 50 mm, and 50 x 50 mm can be made by order. Surface finish can be electro zinc plated, hot dipped galvanized, powder coated, pre-galvanized, or stainless steel electropolished. Width, height, wire diameter, finish, accessories, and packing should be confirmed by project requirement.

Specifications

Product Name: Wire Mesh Cable Tray, wire basket cable tray, welded wire cable tray

Material: Carbon steel wire or stainless steel wire by order

Structure: Welded steel wire mesh, open basket type

Standard Length: 3000 mm

Mesh Pitch: 100 x 50 mm as common pitch; 50 x 50 mm available by order

Width: According to project requirement

Height: According to project requirement

Wire Diameter: According to tray size and load requirement

Surface Finish: Electro zinc plated, hot dipped galvanized, powder coated, pre-galvanized Z300, or stainless steel electropolished

Electro Zinc Plated: For indoor use, reference BS EN 12329-2000, approx. 12 microns when required

Hot Dipped Galvanized: For outdoor use, reference BS EN 1461-1999, commonly 60-80 microns when required

Powder Coated: Mainly for indoor use. Color and coating thickness should be confirmed by order

Pre-Galvanized: Z300 coating can be checked according to order

Stainless Steel Finish: Electropolishing available for stainless steel trays

Accessories: Hold down saddle, joiner clamp set, wall bracket, hanging bracket, support, bolt and nut set

Packing: Iron pallet or export pallet packing

Use Note: Load capacity and support span should be checked according to tray size, wire diameter, cable weight, and installation method.

Application

• Low voltage cable routing in factories, workshops, and equipment rooms.
• Telecommunication cable and data cable management in commercial buildings.
• Fiber optic cable support in network rooms and light industrial projects.
• Short-span cable runs where ventilation and easy cable access are required.

Stock Product Options

3000 mm Electro Zinc Wire Mesh Cable Tray

This electro zinc wire mesh cable tray is used for indoor low voltage and data cable routing. It is suitable for dry indoor areas such as equipment rooms, workshops, and commercial buildings. The 3000 mm length is convenient for project installation.

Specifications:
Material: Carbon steel wire
Length: 3000 mm
Mesh Pitch: 100 x 50 mm
Surface: Electro zinc plated
Reference: BS EN 12329-2000
Zinc Thickness: Approx. 12 microns when required
Packing: Iron pallet or export pallet

Use: Indoor low voltage cables, data cables, telecom cables, and equipment room wiring.

Remark: Not suggested for outdoor exposed installation.

3000 mm Hot Dipped Galvanized Wire Basket Cable Tray

Hot dipped galvanized wire basket cable tray is used for outdoor or humid working areas. The zinc layer is heavier than electro zinc finish. It is selected for factories, warehouses, industrial buildings, and outdoor cable runs.

Specifications:
Material: Carbon steel wire
Length: 3000 mm
Mesh Pitch: 100 x 50 mm
Surface: Hot dipped galvanized
Reference: BS EN 1461-1999
Zinc Thickness: Commonly 60-80 microns when required
Accessories: Joiner clamp and hold down saddle available

Use: Outdoor cable routing, warehouse wiring, industrial buildings, and humid areas.

Powder Coated Wire Mesh Cable Tray

Powder coated wire mesh cable tray is used for indoor projects where color or a clean visible surface is required. It is often used in commercial buildings, public areas, and visible cable routes. Color should be confirmed before order.

Specifications:
Material: Carbon steel wire
Length: 3000 mm
Mesh Pitch: 100 x 50 mm or 50 x 50 mm by order
Surface: Powder coated
Color: Black, white, grey, or custom color
Packing: Pallet packing

Use: Indoor cable routing, commercial building wiring, telecom cable support, and visible installations.

Remark: Mainly for indoor use. Coating thickness should be confirmed by order.

Stainless Steel Wire Mesh Cable Tray With Electropolished Finish

Stainless steel wire mesh tray is used where a clean surface or better corrosion resistance is needed. Electropolished finish is available for stainless steel trays. It is suitable for clean workshops, food-related areas, and selected humid indoor environments.

Specifications:
Material: Stainless steel wire
Length: 3000 mm
Mesh Pitch: 100 x 50 mm
Surface: Electropolished
Accessories: Stainless steel or galvanized accessories by order
Packing: Iron pallet or export pallet

Use: Clean rooms, food processing areas, humid indoor areas, and stainless cable support systems.

Remark: Stainless steel grade should be confirmed before quotation.

50 x 50 mm Pitch Wire Mesh Cable Tray

50 x 50 mm pitch tray is used when the project needs smaller mesh openings or more support under smaller cable bundles. Width, height, wire diameter, and finish should be checked according to project drawings.

Specifications:
Material: Carbon steel or stainless steel
Length: 3000 mm or by order
Mesh Pitch: 50 x 50 mm
Surface: Electro zinc, hot dipped galvanized, powder coated, or stainless steel finish
Accessories: Joiner clamp, saddle, support, bracket
Packing: Pallet packing

Use: Fiber optic cable, small-diameter cable bundles, short-span support, and project cable routing where tighter mesh is preferred.