Stainless Steel Wire Mesh is made from stainless steel wire for filtration, sieving, screening, ventilation and protection. We supply woven mesh as the main product type. Welded stainless steel mesh can be quoted by order. Plain weave is used for common square opening mesh. Twill weave is used for finer mesh counts. Dutch weave is used for filter media where micron retention is required. Common grades are 304, 316, 316L and 430 (430 is magnetic, used for dry screening and indoor panels). 310S, 2205 and 2507 can be quoted by order. Please confirm mesh count, wire diameter, roll width and material grade before quotation, because these details directly affect aperture, open area and cost.

Specifications

Material: 304, 316, 316L, 430 stainless steel (430 is magnetic, with lower corrosion resistance than 304/316); 310S, 2205 and 2507 by order

Product Type: Woven stainless steel mesh (main product), welded stainless steel mesh by order

Weaving Method: Plain weave, twill weave, plain Dutch weave

Mesh Count: 2 mesh to 500 mesh for common woven mesh

Wire Diameter: About 1.8 mm to 0.025 mm for the listed plain weave range

Aperture: Depends on mesh count and wire diameter. For example, 20 mesh × 0.30 mm wire has about 0.97 mm aperture.

Plain Weave Sizes: 2 mesh × 1.8 mm, 10 mesh × 0.55 mm, 20 mesh × 0.30 mm, 60 mesh × 0.15 mm, 100 mesh × 0.10 mm, 200 mesh × 0.053 mm, 500 mesh × 0.025 mm

Twill Weave Sizes: 100 mesh × 0.14 mm, 150 mesh × 0.09 mm, 200 mesh × 0.06 mm, 300 mesh × 0.04 mm, 400 mesh × 0.03 mm, 500 mesh × 0.025 mm

Plain Dutch Weave Sizes: 80 × 300, 80 × 400, 50 × 250, 40 × 200, 24 × 110, 20 × 150, 12 × 64 (warp mesh × weft mesh)

Roll Width: 1.0 m, 1.2 m and 2.0 m are common. Wider rolls can be discussed according to mesh count and weaving type.

Roll Length: Common 30 m per roll

Cutting Service: Sheets, strips, discs, filter cones and pleated filter parts can be made by drawing or sample.

Surface: Plain stainless steel surface, no galvanized coating

Packing: Waterproof paper, plastic film, wooden case or pallet packing according to order size

Applications

• Liquid and powder filtration in chemical, food and general processing lines.
• Sieving and screening for powder, granules and small solid materials.
• Ventilation mesh, machine guard, cabinet mesh and equipment protection.
• Filter discs, filter cones, cartridges and other fabricated filter parts.

Stainless Mesh Product Normal Specification

Common Supply Options

These are reference specifications for woven stainless steel mesh. Current availability, roll width and lead time must be confirmed before quotation.

304 Stainless Steel Wire Mesh 20 Mesh × 0.30 mm

This is a common plain weave mesh for screening and ventilation parts. The aperture is about 0.97 mm. It is easy to cut into sheets, strips or small panels. 304 grade is suitable for general indoor and normal industrial use.

Short Description:
304 stainless steel plain weave mesh, 20 mesh count with 0.30 mm wire. Used for screening, ventilation panels and general protection parts. Supplied in rolls or cut pieces by order.

Specifications:
Material: 304 stainless steel
Weave: Plain weave
Mesh Count: 20 mesh
Wire Diameter: 0.30 mm
Aperture: About 0.97 mm
Use: Screening, ventilation, guard mesh, panel insert

316 Stainless Steel Wire Mesh 60 Mesh × 0.15 mm

This option is used when the buyer needs finer screening and better corrosion resistance than 304. It is often used in wet or chemical-related environments. Please confirm the working liquid or powder before selecting 316 mesh.

Short Description:
316 stainless steel wire mesh, 60 mesh with 0.15 mm wire and about 0.273 mm aperture. Suitable for fine screening, filter support and corrosion-related applications.

Specifications:
Material: 316 stainless steel
Weave: Plain weave
Mesh Count: 60 mesh
Wire Diameter: 0.15 mm
Aperture: About 0.273 mm
Use: Fine screening, filter mesh, chemical processing support

304 Stainless Steel Twill Weave Mesh 200 Mesh × 0.06 mm

Twill weave is used for fine mesh counts. This 200 mesh type has about 0.067 mm aperture. It is suitable for filter discs, fine screen parts and small filter pieces. The mesh is thin, so packing method should be confirmed before shipment.

Short Description:
304 stainless steel twill weave mesh, 200 mesh with 0.06 mm wire. Used for fine filtration, screen discs and small filter parts. Cut size can be made by drawing.

Specifications:
Material: 304 stainless steel
Weave: Twill weave
Mesh Count: 200 mesh
Wire Diameter: 0.06 mm
Aperture: About 0.067 mm
Use: Fine filter mesh, screen disc, industrial separation

316L Plain Dutch Weave Mesh 80 × 400

Plain Dutch weave mesh is selected for filtration, not for normal square opening screening. This 80 × 400 type has about 32-45 micron retention. It can be used for filter cartridges, filter cones and liquid filtration parts.

Short Description:
316L plain Dutch weave stainless mesh, 80 × 400 (warp 80 mesh × weft 400 mesh), with about 32-45 micron retention. Used for filter elements, filter cones and cartridge support parts.

Specifications:
Material: 316L stainless steel
Weave: Plain Dutch weave
Mesh Count: 80 warp × 400 weft
Micron Retention: About 32-45 micron
Cloth Thickness: About 0.23 mm
Weight: About 0.82 kg/m²
Use: Filter cartridge, filter cone, liquid filtration

430 Stainless Steel Wire Mesh 10 Mesh × 0.55 mm

430 stainless steel is magnetic and has moderate corrosion resistance. It is suitable for dry screening, guards and indoor panels. It is not recommended for acid, marine or high-humidity use unless the buyer has confirmed the working condition.

Short Description:
430 stainless steel plain weave mesh, 10 mesh with 0.55 mm wire and about 1.99 mm aperture. Used for dry screening, guards and indoor mesh panels.

Specifications:
Material: 430 stainless steel (magnetic, lower corrosion resistance than 304/316)
Weave: Plain weave
Mesh Count: 10 mesh
Wire Diameter: 0.55 mm
Aperture: About 1.99 mm
Use: Dry screening, machine guard, indoor mesh panel